Figure 8
1.
Remove existing hardware
4.
Washer
2.
Retain nut
5.
3/8-16 x 1 1/4 inch hex
screw
3.
Nyloc nut
6.
LH weight mount bracket
2. Using 3/8-16 x 1 1/4 inch hex screw, two washers,
and 3/8 inch nyloc nut, install the LH weight mount
bracket into the middle hole of the mower frame
(see Figure 8).
3. Secure the bracket by installing 3/8-16 x 1 1/4 inch
hex screw, into the middle hole of the LH weight
mount bracket. Reuse the nut retained from step 1.
4. On the RH side of the mower, remove the front
hardware from the deck lift mount bracket and from
the front frame hole (see Figure 9). Retain the nuts
and discard the screws.
Figure 9
1.
Remove existing hardware
4.
RH weight mount bracket
2.
Existing nuts
5.
3/8-16 x 1 1/4 inch hex
screw
3.
Deck lift mount bracket
5. Install the RH weight mount bracket using two
3/8-16 x 1 1/4 inch hex screws and the nuts retained
in step 4.
6. Install the weight holding bracket by aligning the
outboard holes in the bracket with the LH and RH
weight mounting brackets. Secure with two 3/8-16 x
1 inch screws and two 3/8 inch nyloc nuts.
G014879
1
2
3
4
5
Figure 10
1.
3/8 inch nyloc nuts
4.
3/8-16 x 1 inch screws
2.
Weight holding bracket
5.
RH weight mounting
bracket
3.
LH weight mounting
bracket
7. Install the flat weight flush against the holding
bracket. Install the suitcase weight in front of the
flat weight (see Figure 11).
Figure 11
1.
Holding bracket
4.
Suitcase weight
2.
Weight lock rod—unlocked
position
5.
Weight lock rod— locked
position
3.
Flat weight
8. Insert the weight lock rod to secure the weights.
Rotate the weight lock rod 90 degrees downward to
lock it into place.
5
