Exmark QUEST 346, Руководство оператора

Страница: 36 / 72

Maintenance
Lubrication
Greasing the Bearings
Service Interval: Every 25 hours/Monthly
(whichever comes first)
Grease Type: NLGI grade #2 multi-purpose gun
grease.
Grease the front caster wheels (Figure 26).
g032432
Figure 26
1. Front caster tire
1. Park machine on level ground, move the motion
control levers out to engage the parking brake,
disengage the blade control switch, stop engine,
and remove key. Wait for all moving parts to stop
before leaving the operator’s position.
2. Clean the grease fittings with a rag. Make sure to
scrape any paint off of the front of the fitting(s).
3. Wipe up any excess grease.
Engine Safety
WARNING
The engine can become very hot, especially the
muffler and exhaust components. Touching a
hot engine can cause severe burns.
Allow the engine to cool completely before
service or making repairs around the engine area.
Do Not change the engine governor setting or
overspeed the engine.
Engine Maintenance
Important:
For Kohler Engines, refer to
the Engine Owner’s Manual for additional
maintenance procedures.
Important:
If you are using a machine with
an Exmark engine above 5,000 ft (1500 m) for a
continuous period, ensure that the High Altitude
Kit has been installed so that the engine meets
CARB/EPA emission regulations. The High
Altitude Kit increases engine performance while
preventing spark fouling, hard starting, and
increased emissions. Once you have installed
the kit, attach the high-altitude label next to
the serial decal on the machine (reference
Figure 1). Contact an Authorized Service Dealer
to obtain the proper High Altitude Kit and
high-altitude label for your machine. To locate a
dealer convenient to you, access our web site at
http://www.Exmark.com or contact our Exmark
Customer Care Department at the number(s)
listed in your Emission Control Warranty
Statement. Remove the kit from the engine
and restore the engine to its original factory
configuration when running the engine under
5,000 ft (1500 m). Do Not operate an engine
that has been converted for high-altitude use at
a lower altitudes; otherwise, you could overheat
and damage the engine. If you are unsure
whether or not your machine has been converted
for high altitude use, look for the following label:
g032724
Figure 27
High Altitude Label
1. Note: The engine on this product has been modified for
use at above 5,000 feet elevation. If using below 5,000
feet, it must be revised back to original specifications.
36