Exmark Quest 126-7510, Руководство пользователя

Страница: 12 / 24

1
2
g030497
g030497
Figure 16
1. Self-tapping screw (5/16 x 3/4 inch)
2. Pivot frame
3. Attach the draw-bar decal 1/2 inch (1.3 cm) to
the left of the attachment mount.
g030498
1
g030498
Figure 17
1. Draw bar decal
4. Install a bent, flared end of a rod into the keyed
slot in the left side of the machine frame, and
move the rod rearward to seat it in the frame.
Note:
Repeat this step for the right side of the
machine.
g030499
1
2
3
4
6 5
g030499
Figure 18
Left side shown
1. Pivot-frame hole 4. Support rod
2. Washer 5. Keyed slot (existing)
3. Hairpin cotter 6. Bent, flared end of support
rod
5. Insert the bent ends of the rod into the
attachment mount and secure the end of each
rod with a washer and hairpin cotter as shown
in
Figure 18 .
4
Assembling the Bagger Top
Parts needed for this procedure:
1 Bagger top
1 Bagger screen
Procedure
Turn the bagger top over. Install the screen as shown
in
Figure 19 so it slopes down toward the collection
bags. Make sure the screens snap into place and the
tabs engage the bagger top.
12