background image

®

MFG. CO. INC.

® 

Engine Model No. and Spec. No. (Code)

Engine Serial No. (E/No)

Date Purchased 

                                                                                              

                                   on the purchase of your new Exmark mower. This product has been carefully designed and manufactured to give
you a maximum amount of dependability and years of trouble-free operation. If additional information is needed, or should you require trained
mechanic service, contact your authorized Exmark equipment dealer or distributor. If you need to order replacement parts from your dealer, 
always give the model number and serial number of your mower as well as the part number, description and quantity of the part needed.

The Serial No. plate is located on the top of the mower deck on the right hand corner of the machine.  For ease of ordering and reference, 
wesuggest that you record the information requested in the following identification table.

Place Model No. and Serial No. Label Here

(Included in Literature Pack)

or Fill in Below

Model No.

Serial No.

 

For Serial Nos. 

670,000 & Higher 

Part No. 109-4826 Rev. A 

Содержание Metro 21 Series

















































Отзывы: