5. Menu Options
The Menu Selection Screen allows the user to cycle
through the different menu options by pressing the
toggle button. When the desired menu option is
highlighted, press the enter button to select it.
Note:
All menu options are locked if the motion
control levers are not placed in the neutral locked
position.
Pressing and holding the two outside buttons returns
the module to the default screens.
The menu selection screen allows the user to cycle
through four main screens.
•
5.1 Maintenance and Service
•
5.2 Gauges and Meters
•
5.3 Advanced Settings
g038651
Figure 7
1.
Maintenance and Service
4.
Cancel/Exit
2.
Gauges and Meters
5.
Toggle between screens
3.
Advanced Settings
6.
Enter/Return
5.1 Maintenance and
Service Menu Option
The user can scroll between the following screens in
the Maintenance and Service menu:
•
5.1.1 Status of Inputs
•
5.1.2 Status of Outputs
•
5.1.3 Current Error Messages
•
5.1.4 Hydraulic Transmission Oil Maintenance
•
5.1.5 Engine Oil Maintenance
•
5.1.6 Machine Information
•
5.1.7 RED Module Software and Hardware
Version
5.1.1 Status of Inputs
This screen lists all of the inputs to the system
and highlights the one currently active. Inputs with
numerical values will display the current value.
g030183
Figure 8
1.
Status of Inputs
5.
Brake
2.
PTO switch
6.
Previous
3.
Neutral
7.
Toggle between screens
4.
Oil pressure
8.
Next
•
System voltage
•
Engine communication (highlights if module is
communicating with engine ECU)
•
PTO switch (highlights if ON)
•
Fuel sender voltage (shows voltage)
•
Neutral switch (highlights if ON)
•
Brake switch (highlights if ON)
•
Seat switch (highlights if ON)
•
Oil pressure switch (highlights if ON)
•
Engine temperature (shows temperature)
8
