Exmark ARS180KA21, Руководство оператора

Страница: 9 / 36

Safety
Safety and Instructional Decals
• Keep all safety signs legible. Remove all grease,
dirt and debris from safety signs and instructional
labels.
• Replace all worn, damaged, or missing safety
signs.
• When replacement components are installed, be
sure that current safety signs are affixed to the
replaced components.
• If an attachment or accessory has been installed,
make sure current safety signs are visible.
• New safety signs may be obtained from
your authorized Exmark equipment dealer or
distributor or from Exmark Mfg. Co. Inc.
• Safety signs may be affixed by peeling off the
backing to expose the adhesive surface. Apply
only to a clean, dry surface. Smooth to remove
any air bubbles.
• Familiarize yourself with the following safety signs
and instruction labels. They are critical to the safe
operation of your Exmark commercial aerator.
117–2718
119-0217
1. Warning—stop the engine; stay away from moving
parts; keep all guards and shields in place.
121-6150
1. Cutting hazard of hand and foot–stay away from moving
parts.
121-6151
1. Choke–on 3. Continuous variable
setting
2. Throttle–fast 4. Throttle–slow
9