Exmark 135-0192, Руководство оператора

Страница: 6 / 28

Safety
Operation
WARNING
Hands, feet, hair, clothing, or accessories can
become entangled in rotating parts. Contact
with the rotating parts can cause traumatic
amputation or severe lacerations.
• Do Not operate the machine without guards,
shields, and safety devices in place and
working properly.
• Keep hands, feet, hair, jewelry, or clothing
away from rotating parts.
• Operate only in daylight or good artificial light,
keeping away from holes and hidden hazards.
• Lightning can cause severe injury or death. If
lightning is seen or thunder is heard in the area,
Do Not operate the machine; seek shelter.
• Be aware of weather conditions and check that
spreader patterns and volume are suitable.
• Never operate the machine with damaged guards,
shields, or covers. Always have safety shields,
guards, switches and other devices in place and in
proper working condition.
• Park machine on level ground. Stop engine, wait
for all moving parts to stop, remove key and
engage parking brake whenever you leave the
machine.
• Stop spreading when making tight turns to
minimize uneven distribution pattern and
application rate.
• Reduce the weight of the load when operating
on hills and rough terrain to avoid tipping or
overturning of the unit.
• Material loads can shift. This shifting happens
most often while turning, going up or down hills,
suddenly changing speeds, or while driving over
rough surfaces. Shifting loads can cause the unit
to tip over.
• When operating with a heavy load, reduce your
speed and allow for sufficient stopping distance.
Use extra caution on slopes.
• Reduce speed and load when operating on rough
terrain, uneven ground, and near curbs, holes, and
other sudden changes in terrain. Loads may shift,
causing the machine to become unstable.
• Heavy loads affect stability. Reduce the weight of
the load and your speed when operating on hills.
Maintenance and Storage
• Close the spreader gate, set the parking brake,
stop engine and remove key or disconnect spark
plug wire. Wait for all movement to stop before
adjusting, cleaning or repairing.
• Empty the hopper before tilting unit for
maintenance and before storing.
• Keep hands and feet away from moving parts.
If possible, do not make adjustments with the
engine and/or the impeller running.
• Keep all guards, shields and all safety devices in
place and in safe working condition.
• Check all bolts frequently to maintain proper
tightness.
• Frequently check for worn or deteriorating
components that could create a hazard.
WARNING
Removing standard original equipment parts
and accessories may alter the warranty, traction,
and safety of the machine. Failure to use original
Exmark parts could cause serious injury or
death. Making unauthorized changes to the
engine, fuel or venting system, may violate EPA
and CARB regulations.
Replace all parts including, but not limited to,
tires, belts, tines, and fuel system components
with original Exmark parts.
6