
24
UK
8. Temperature scale
9. 100 °C button
10. Temperature setting button
11. On/Off button
BEFORE USING FOR THE
FIRST TIME
Before using for the first time (or after a
long period of storage), fill the appliance
with water and boil the water. Empty and
refill and boil again.
1. Fill with water to the maximum mark.
2. Switch on as described under “Using
the Appliance”. Allow the water to boil.
3. Pour out the water once it has boiled.
4. Repeat point 2 once more. The appli-
ance is now ready for use.
USE
1. Open the lid (1) using the release but-
ton (2).
2. Pour fresh water into the appliance.
Fill the appliance with water at least
to the minimum mark (“MIN”) and
not exceeding the maximum mark
(“MAX”).
3. Close the lid and ensure that it clicks
into place.
4. Place the appliance on its base sta-
tion (5) by positioning it so the stud
on the base fits into the hole on the
underside of the appliance.
5. Connect the appliance by plugging
the plug into the socket and turning
power on.
6. Press the On/Off button (11).
Adjust the temperature to which the
water should be heated by pressing
the /- (10) one or more times.
The temperature can be set to 40, 55,
80, 95 or 100 °C.
7. You can also press the button (9) to
set the temperature to 100 °C. When
the water has been heated to the
selected temperature, the appliance
turns off automatically.
- If you want to interrupt the boiling,
you can shut off the appliance at any
time using the on/off button.
Anti boil-dry device
• If you switch the appliance on without
having filled it with water, or when the
water level is below the “MIN” mark,
the anti boil-dry device will automati-
cally switch it off. The appliance can
be switched on normally as soon as
it is filled with a sufficient amount of
water.
8
9
10
11