Exide GEL G85, Руководство пользователя

Страница: 19 / 20

Correct jump starting . . .
18
b) Starting
After connecting the jump lead cables, the engine of the
donor vehicle must be started and set to medium revolu-
tion speed. Next the engine of the broken-down vehicle is
started. After each attempted start, which must not last
longer than 15 seconds, a waiting time of at least 1 minute
must be interposed. After successfully starting the engine
of the broken-down vehicle, wait 2 to 3 minutes until it is
running smoothly.
c) Disconnecting
Disconnect the jump lead cables in the reverse of the
connection sequence: first remove the black terminal
clamp from the earthing strap or engine block (see Figure,
Position 4) of the broken-down vehicle. Then remove the
other black terminal clamp from the negative pole of the
donor battery (see Figure, Position 3). Next remove the
two red terminal clamps in any order (see Figure, Position
1 and 2). When removing the jump lead cables, take care
to ensure that they do not come into contact with the rota-
ting parts of the engines.