7
En
gl
is
h
Listening to FM radio
FM mode MENU
1. Press [ MENU ].
2. Turn the [ VOLUME/SELECT ] knob for selecting amongst the
Scan setting
,
Audio setting
, or
System
menus.
3. Press [ TUNE/ENTER ] to select any one of the desired menu options.
Turn the [ VOLUME/SELECT ] knob to adjust the settings for any of the chosen
menu selections. Confirm by pressing [ TUNE/ENTER ].
• Scan setting: Select whether the radio is to accept only those stations with strong
signals (
Strong station
) or all available stations (
All stations
).
• Audio setting: Select whether the radio is switched automatically between stereo
and mono depending on the signal strength (
Stereo allowed
) or whether it is
always in mono mode (
Forced mono
). Forced mono can improve the reception in
case of poor reception conditions.
• The main System menu has three submenus: Time and date (
Time
), default
factory reset (
Factory Reset
) or software version info (
SW version
).
Automatic scan
1. Select
FM
by pressing the [ DAB/FM ] button.
2. Activate auto scan by pressing and holding in [ TUNE/ENTER ]. The scan stops
when a station has been found.
Manual scan
To scan for stations manually, press [ TUNE/ENTER ] and when the display shows
“TUNING”, turn [ VOLUME/SELECT ] until you get the best reception.
Stereo/mono
1. Press [ MENU ] and then turn [ VOLUME/SELECT ] to come to
Audio Setting
.
2. Press [ TUNE/ENTER ] to select between stereo and mono depending on the signal
strength (
Stereo allowed
) or whether it is always in mono mode (
Forced mono
).
