Hermiankatu 6
–8, 33720 Tampere | +358 10 773 5400 | [email protected] |
www.exilight.com
MANUAL
You can remove appliance from the appliance list as follows:
-
From the menu choose “Remove appliance”
-
Then choose if the appliance is in Loop 1 or Loop 2
-
Find the appliance that needs to be removed by browsing the list with “UP and “DOWN”
buttons
-
When you find the right appliance ID that has to be removed push “SET” three times. This
is to make sure that you don’t accidentally remove appliance that you are not supposed to
remove.
21.
Print errors
You can connect your PC with the ESC-200 and print out the errors.
22.
Start new installation
By choosing “Start new installation” the center finds all the appliances connected to the system.
Center ask before new installation”delete memory” you can choose ”no” or ”yes”. If you choose
”yes” centter will delete luminaire addresses what is in memory.
23.
Set day + time
Here you can set the date and time for the system
24.
Emergency lights on
This is to start test for the system. This is used to check the communication between panel and
luminaires. Communication should be Ok if emergency luminaires are set ON with this test
Changing the Operating Language
If the ESC-200 emergency lighting center is delivered to you with settings in
Finnish, here is how you can change the language to English.
You start by pushing the
“
SET
”
button when you have the operating status shown in the
picture 1.
Then push the
“
DOWN
”
button until you get the display shown in picture 2.
After that push
“
SET
”
and by
“
UP
”
or
“
DOWN
”
button choose
“
ENGLISH
”
as shown in
the picture 3. Push
“
SET
”
to select the language.
Now you have the ESC-200 Emergency Lighting Center set in English.
