manualshive.com logo in svg

EXFO Power Blazer 88200NGE, Руководство пользователя, Страница: 415 / 887

Поделиться
Скачать
EXFO Power Blazer 88200NGE Скачать руководство пользователя страница 415

Test Results

Power Blazer

405

Alarms/Errors Overview

Ethernet 

Note:

Available with EtherBERT, Wander, and OTN BERT with EoOTN client. 
For Wander test application only 

Link Down

 alarm is supported. 

Alarms

Note:

For 

LOA

, 

Inv. Mapping

, 

L Deg SER Det

, 

L Deg SER Rcd

, and 

R Deg SER

 

alarms see 

Ethernet - PCS

 on page 408. 

Link Down

 

RX

: For 10/25/40/100/200/400G: There is a local or a remote fault 

condition. For 100/1000 Mbit/s: No bits/clock sync (PMA/PMD Link 
down), including LOS. For 10 Mbit/s: No data or no Normal Link Pulse 
(NLP) are received. 

Local Fault Det

1

 (Local Fault Detected) 

RX

: At least one of the following events is detected: Loss of bit 

synchronization, Loss of Block synchronization, Link down, or High 
BER. 

Local Fault Rcd

1

 

(Local Fault Received) 

RX

: The received data path contains the 

Local Fault

 signal.

Remote Fault

1

 

RX

: The received data path contains the 

Remote Fault

 status. 

Hi-BER

 (High-Bit Error Ratio) - (Available with 25/40/100GE interface, 

and EoOTN 100 GbE client). 

RX

: The bit error ratio is > 10

-4

 on a fixed time period; 2 ms for 25G, 

1250

μ

s for 40G, and 500

μ

s for 100G. 

1. Available with Ethernet 10/25/40/100/200/400 Gbit/s interface, Ethernet (flex/GFP-F) client, and EoOTN 10/40/100 GbE 

client. Remote Fault is also available with EoOTN 1GbE client.  

Содержание Power Blazer 88200NGE
























































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов