EXFO OTH-7000, Руководство пользователя, Страница: 25 / 82

Getting Started with Your Unit
Optical Test Head
17
Installing Your Unit in a Rack
To install your unit in a rack:
1.
Ensure that your unit is turned off.
2.
Ensure that no USB or electrical cables are connected to the unit.
3. Position the unit so that its bottom panel rests on a flat surface such as
a table.
W
ARNING
³
The equipment rack must be anchored to an unmovable
support to prevent it from falling over when one or more units
are extended in front of the rack on slides. You must also
consider the weight of any other device installed in the rack. A
crush hazard exists if the rack tilts forward, which could cause
serious injury.
³
Mounting of the unit in a rack or cabinet should be such that a
hazardous condition is not achieved due to uneven mechanical
loading.
I
MPORTANT
The OTH-7000 is only half a unit high.
To maximize the utilization of rack space in 19-inch racks, EXFO
recommends to alternate the position of the brackets for each unit.
The brackets should be placed with their rack screw holes at the
bottom for the first unit, at the top for the second, at the bottom
for the next unit, and so on (see illustrations hereafter).