R
EMOTE
C
ONTROL
6-34
LTS-3900
4XLFN
#
5HIHUHQFH
#
&RPPDQG
#
7UHH
*
These commands are not executed if a data acquisition is in progress. The message “Acquisition already
running” will then be returned.
REF
<±99.99> [DBM]
Set reference value
REF?
(+99.99) [DBM]
Get reference value
SENS
POW
REF
DISP *
Set new reference
STAT *
<0|1>
Set absolute or relative
STAT?
(0|1)
Get absolute or relative
UNIT *
<WATT|DB|
DBM|DWATT>
Set display unit
UNIT?
(WATT|DB|
DBM|DWATT)
Get current display unit
WAVE *
<9999> [NM]
Set wavelength
WAVE?
(9999) [NM]
Get wavelength
WAVE
CATA?
list of wavelengths Get list of calibrated wavelengths
SOUR
AM
[:INT]
FREQ
<value> [HZ|
KHZ] | CW
Set source modulation
FREQ?
(2 KHZ | CW |
OFF)
Get source modulation
POW
STAT
<0|1|ON|OFF>
Turn source on or off
STAT?
(0|1)
Get source state
WAVE
<UPP|LOW>
Set source wavelength
WAVE?
(9999)
Get source wavelength
VFL
AM
[:INT]
FREQ
<1 HZ] | CW>
Set VFL modulation
FREQ?
(1 HZ | CW | OFF) Get VFL modulation
STAT
<0|1|ON|OFF>
Turn VFL on or off
STAT?
(0|1)
Get VFL state
Command
Parameter/
Response
Description
Table 6-5. LTS-3900 Command Tree (Part 2 of 2)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
