A Single Tool for All Backreflection,
Fiber-Length and Loss Measurement Needs
FOT-930 MaxTester
Because learning how to operate only one instrument is easier and much faster, test
specialists should choose an all-in-one tool that enables them to perform tasks such as
installing long-haul high-speed networks, testing 1310/1490/1550 nm transmission in
FTTH networks, performing multimode testing in enterprise networks, etc.—a do-it-all
solution such as the FOT-930 MaxTester.
Key Advantages for All Network Types
Fast, three-wavelength loss and ORL testing
User-configurable pass/fail thresholds for error-free testing
The only unit designed for testing both multimode and singlemode fiber
Video fiber inspection probe, for easy viewing of connectors and fiber ends on the
FOT-930’s high-resolution display
GeX detector, for high-power measurement up to +26 dBm
Complete report generation capabilities
Talk set and VFL options
Ease of use, for faster testing, reduced training, minimum error potential, etc.
In 10 seconds, the MaxTester’s FasTest function provides
insertion loss and ORL values for up to three wavelengths—
including either 1490 or 1625 nm—on a single port.
Talk Set Port
For crystal-clear voice communication.
Power Meter Detector Port
Compatible with almost every connector on
the market. Manually and efficiently perform
power and loss testing. Accurately
measure power up to +26 dBm.
FasTesT Ports
Perform loss, ORL and fiber length
measurements for up to three SM
wavelengths on one port, and for two MM
wavelengths on a second port.
VFL
Built-in 650 nm visual fault location on a
universal connector.
