Tunable Laser
Source
FLS-2800
FLS-2800 (v1.1)
24
If a firmware update is required. The
‘Update Firmware’ tab can be used to
upload the new firmware to the
instrument.
The current versions of the firmware of
both the selected system and module are
listed within the ‘Current Version’ panel.
Figure 21 - Update Firmware Settings
System Update
To perform an update of an FLS-2800 system:
1.
Use the browse button
, to locate the firmware update file.
2.
Select the target instrument from the dropdown box.
3.
Select
‘System Firmware’
from the module select dropdown box.
4.
Click upgrade to perform the update procedure.
5.
Wait for the update to finish, this can take up to two minutes. Do not power off the
instrument during the firmware upgrade.
Module Update
To perform an update of an FLS-2800 laser module:
1.
Use the browse button
, to locate the firmware update file.
2.
Select the target instrument from the dropdown box.
3.
Select ‘Laser Module’ from the module select dropdown box.
4.
Click upgrade to perform the update procedure.
5.
Wait for the update to finish, this can take up to two minutes. Do not power off the
instrument during the firmware upgrade.
About
To view EXFO company information, click the ‘
About
’ button.
