MaxTester DSL
21
Test Setup
The
Test Setup
tab allows you to configure values for the optional sub-tests within
the 3 types of test applications. You must highlight the sub-test on the
Select Tests
page in order to display the sub-test’s parameters on the
Test Setup
page.
IPTV Test Setup
IPTV test supports STB (set-top box) emulation mode over
xDSL and Ethernet interfaces enabling the MaxTester to
join and leave multicast IPTV streams. The following
parameters can be configured from the
Test Setup
tab:
³
Display Mode
is either the
Channel Name
or
#
used
for displaying channel information in the result pages.
³
IGMP Version
is a value of either
2
or
3
used to send
IGMP join/leave messages.
Note:
If you change the
IGMP Version
from the
default of 2 to 3, you must reboot your unit.
³
Max TS Packet Loss Ratio
is an editable percentage,
ranging from 1 to 50, used to qualify if the IPTV stream
is stable.
³
Max ZAP Time
is an editable value ranging from 0 to 10,000 that measures the
channel switch time in ms.
³
Channel List Setup
button accesses the page to configure parameters for
channel analysis.
³
Auto IPTV Test Setup
button accesses the setup page to automatically run an
IPTV test. This function is only available in
Auto Test Setup
application.
To configure test setup values:
1.
Press the up/down arrow keys to select the desired parameter.
2.
Press the left/right arrow keys to view and select the options.
OR
3.
Press
on a value to open a list box of options or the alphanumeric editor
screen and use the navigation keys to scroll through.
4.
Press
to confirm the value.
5.
If you make any changes to the parameter values, press the on-screen function
keys to save or cancel your input.
Содержание EXFO MaxTester DSL
Страница 1: ...User Guide FTTx Test Set MaxTester DSL ...
