Exerpeutic WorkFit, Руководство пользователя

Страница: 16 / 27

Tool:
13-15mm Wrench
5mm Allen Wrench
With Phillips Screwdriver
Step 6. Desk Installation
Align the bolt holes of the U shaped bracket on the underside of the
Desk (88)
with the holes on
the bracket at the top of the
Desk Mount (87)
. Insert the
Plastic Bushing (92)
into the bracket
of the
Desk Mount (87)
as shown in
Fig. AA-8
. Attach the
Desk (88)
, the
Desk Mount (87)
and
the
Plastic Bushing (92)
with one
Flat Washer (33)
, one
Nylon Nut (34)
, one
Flat Washer
(114)
and one
Hexagon Socket Bolt (97)
. Simultaneously tighten the bolt and nut with the
5mm
Allen Wrench with Phillips Screwdriver
and the
13-15mm Wrench
provided.
Insert the
Slide Knob (95)
onto the underside of the
Desk (88)
by twisting it
clockwise
(as
shown in
Fig. AA-8
). Connect the
Connection Wire B (99)
from the
Desk Mount (87)
to the
Upper Hand Pulse Wire (110B) (see Fig. AA-6)
. Connnect the
Console Wire (112)
to the
Upper Console Wire (110A) (see Fig. AA-7)
.
Set the
Desk (88)
flat on the
Desk Mount (87)
and assemble the
Desk (88)
angle adjustment by
inserting one
Hexagon Socket Bolt (103)
with one
Flat Washer (33)
and one
Spring Washer
(102)
into the left side of the
Desk Mount (87)
. Make sure the
Hexagon Socket Bolt (103)
goes
into the curved slot on the
Bracket of the Desk (88)
. Tighten the bolts with the
5mm Allen
Wrench with Phillips Screwdriver
provided. Insert the
Pop Pin (94)
into the hole on the right
side of the
Desk Mount (87)
and tighten it by turning it
clockwise
until snug.
ASSEMBLY
14
(103) Hexagon Socket Bolt
M8*25 1PC
(97) Hexagon Socket Bolt
M8*58 1PC
(102) Spring
WasherØ8.2
1 PC
(33) Flat Washer Ø8.2
2 PCS
(34) Nylon Nut M8
1 PC
(92) Plastic Bushing 1PC
(114) Flat Washer Ø10.2
1 PC
Hardware: