11
Step 2
2a Attaching Pedal Straps
:
Remove the
Left Nylon Nut (112)
and
Right Nylon Nut (84)
from the
Left Pedal (7)
and
Right Pedal (8)
. Attach the
Left Pedal Strap (7-1)
onto the
Left Pedal (7)
and
the
Right Pedal Strap (8-1)
onto the
Right Pedal (8)
.
2b
Installation of Left Pedal:
Align and insert the
Left Pedal (7)
into the threaded hole in the
Left
Crank (23)
in a counter-clockwise direction. See diagram
AA-2
. Lightly screw in the
Left
Nylon
Nut (112)
back onto the protruding pedal shaft in the clockwise direction. Finish off the tightening of
the
Left Pedal (7)
and the
Left Nylon Nut (112)
by using the
13-15mm Wrench
and the
19mm
Wrench
.
Install the Left Pedal (7) only with a counter-clockwise direction and the Left Nylon
Nut (112) only with a clockwise direction.
SEE WARNING BELOW ILLUSTRATION.
2c Installation of Right Pedal:
Remove the
Right Nylon Nut (84)
from the
Right Pedal (8)
and
repeat steps from
2b
for the
Right Pedal (8)
installation into the
Right Crank (24)
with the
difference being that you turn the
Right Pedal (8)
shaft clockwise. Install the
Right Nylon Nut (84)
with a
counter-clockwise
direction.
The Cranks, Pedals, Pedal Shafts, and the Pedal Straps
are marked “R” for Right and “L” for
Left.
See
ADJUSTMENTS pages
for instructions to install and adjust the pedal straps.
This machine is not intended to be pedaled in reverse.
!
!
ASSEMBLY
WARNING:
Install the
Left Pedal (7)
only with a counter-clockwise
direction. Turning it in the wrong direction will damage the threads. The
Right Pedal (8)
should be installed only in the clockwise direction.
Tools:
19mm Wrench
1PC
13-15mm Wrench
1PC
Содержание 525XLR
Страница 5: ...3 LABEL PLACEMENTS...
Страница 8: ...6 OVERVIEW DRAWING...
Страница 11: ...9 HARDWARE TOOLS PACK...
