background image

 

 

IMPORTANT SAFETY GUIDELINES

 

 

 

Basic precautions should always be followed, including the following safety guidelines 

when using this equipment. Read all of the guidelines before using this equipment. 

 

1.  Before exercising and to avoid injuring your muscles, it is highly recommended that you perform 

warm-up exercises for each muscle group.   

2. 

Make sure all the components are not damaged and are in working order before using. This equipment 
should be placed on a stable, flat surface. Using a mat or similar, covering material on the ground is 
recommended. 

3. 

Wear proper fitness apparel when using this equipment. Do not wear loose clothing or accessories that 
may get caught by any part of the equipment. 

4. 

Make sure all the components are not damaged and are in working order before using.   

5. 

Remember to tighten the pedaling straps. Keep dry. Do not operate the equipment in wet or moist 
condition.  

6. 

Do not use the equipment outdoors. This equipment is for household use only.   

7. 

Only perform maintenance or adjustments that are instructed in this manual. Should any problems arise, 
discontinue usage of the equipment and consult with our customer service. 

8. 

Only one person should be on the equipment at a time. Keep children and pets away from the product 
at all times. This machine is designed for adults only. 

9. 

Be careful to always hold onto the handlebars when you’re mounting and dismounting. Be careful to 
have the pedals at their lowest point when stepping off.   

10.  Hold onto the handlebars and use both the pedals in tandem to ensure a smooth, effective workout. 
11.  This product requires a minimum of 6 square feet around for safe operation. 
12.  If you feel any chest pains, nausea, dizziness, or shortness of breath, you should stop exercising 

immediately, and consult your physician before continuing. 

13. 

DO NOT

 pedal in reverse. 

14. 

The maximum weight capacity for this product is 270 lbs/123 kgs

.  

 

WARNING:

 

Before beginning any exercise program consult your physician. This is 

especially important for the people who are over 35 years old or who have pre-existing health 

problems.  

 

 

CAUTION:

  Read all instructions carefully before operating this product. Retain this 

Owner’s Manual for future reference.

 

 

 

 

 

 

 

 

Содержание 1317.5-101016

































Отзывы: