background image

 

 

IMPORTANT SAFETY GUIDELINES

 

 

 

 

Keep Dry - do not operate in a wet or moist condition. Save these 

instructions.

 

 

 

Do not operate the treadmill near a blanket. Excessive heating can occur and 

cause fire, electrical shock, or injury to user. 

 

Keep electrical cord away from heated surfaces. 

 

Never insert any object into any opening. 

 

Keep the treadmill on a solid, level surface with the minimum safety area 

clearance of 2000mm x 1000mm of the treadmill. Be sure the area around 

the treadmill remains clear during use and has adequate clearance. 

 

This treadmill is for household use only. 

 

Only 

one

 person should be on the treadmill while in use. 

 

Wear comfortable and suitable clothing when using the treadmill. Do not use 

the treadmill barefoot, in only socks or in sandals, always wear athletic shoes. Never wear loose 

clothing because it could run the risk of getting caught in the treadmill. 

 

Always hold on to the handrails while using the treadmill. 

 

Always make sure the storage latch is in place when folding and moving the 

treadmill. 

 

Do not leave children who are under 13 years old unsupervised near or on the 

treadmill. 

 

To disconnect, turn all controls to the off position, then remove plug from outlet. 

 

This appliance is not intended for use by persons (including children) with 

reduced physical, sensory or mental capabilities, or lack of experience and 

knowledge, unless they have been given supervision or instruction concerning 

use of the appliance by a person responsible for their safety. Children should 

be supervised to ensure that they do not play with the appliance. 

 

Pull up the Safety Tether Key for emergency stop. Reinstall the Safety Tether 

Key onto the Computer Console. Press the START/STOP button to begin 

exercise again. 

 

Maximum Weight Capacity is 400 lbs

 

/ 182kgs 

 

This treadmill is designed for 

WALKING

 only.

 

 

CAUTION: 

Risk of Injury to Persons –To Avoid Injury, use extreme caution when stepping onto 

or off of a moving belt. Read Instruction Manual Before Using.

 

Note: It is the obligation of the owner to review and explain these safety precautions to all 

users of this treadmill. 

 

 

Содержание 1020H






























Отзывы: