Exero Spike Kneeled, Руководство пользователя

Страница: 47 / 68

4.1.3 Nuts and bolts for seat arm and seat post
Before tightening these bolts you must remove the protection cap. Inspect the
screws and nuts on the seat arm and seat post. Use a
13 mm wrench and
adjustable wrench and tighten, see figure 4.1.3. Re-place protection cap.
Figure 4.1.3 - Tightening seat arm (right) and seat post (left)
4.1.4 Screws for front slider
Inspect the four screws on the front slider, two on each side, see figure 4.1.4.
These should be extensively tightened so the sliders don’t move on the
mainframe. Use a hex key
4 mm .
47