exemys RMS1-GR, Руководство пользователя

Страница: 8 / 25

RMS1 – GR User’s Manual Exemys
www.exemys.com
8
1.6 LED Indicators
RMS1-GR device has 3 LED Indicators:
Power , Rx and Tx.
Power LED
This LED indicates different device statuses.
When energizing the equipment, the
Power LED flickers rapidly during the first 7 seconds,
indicating the time to enter the “CFG” command that gives you access to the configuration of
the device. If you have not entered the command within this time, the
Power LED remains
ON during the rest of the operation, indicating that the equipment is energized.
In case the command CFG is entered, the
Power LED flickers slower while remaining in the
configuration mode. When you exit this mode, the LED remains permanently ON.
Tx and Rx LED’s
The Rx LED flickers when it receives a Modbus packet from the master, even if this packet is
not for the slave ID that is receiving it.
The
Tx LED flickers when a valid Modbus packet is sent to the master. When exceptions are
sent it does not flicker.
Figure 4 – LED’s in the front panel