Basic Operations
Scan
The Scan feature allows the repeater to search the scan list that is attached to the current
channel for an eligible channel to receive or unmute.
Before initiating the scan function using the repeater menu, follow the procedures below to
attach a scan list to the current channel using the CPS.
Procedure:
1. Log in to the CPS.
2. Go to “Conventional -> Scan -> Selected Scan List”.
3. Add channels (analog or digital) to be scanned into the Selected Scan List.
4. Go to “Conventional -> Channel -> Digital/Analog Channel -> Current Channel”.
5. In the Scan/Roam List option, attach the Selected Scan List to this channel.
After you have attached a scan list to the current channel, follow the following procedures
to enable/disable the scan feature via menu operation.
Procedure:
1. In the home screen, press the
SET
key to enter the main menu.
2. Use the
/
key to select the “Function” option.
3. Press the
SET
key to enter the Function menu.
4. Use the
/
key to select the “Scan” option.
5. Press the
SET
key to enter the Scan menu.
6. Use the
/
key to select On or Off.
7. Press the
SET
key to save the settings in the system.
To exit this menu, press the
EXIT
key.
