51
50
Voice Recording (Optional)
Man Down (Optional)
2. Press [
/
]
to Utilities and press [
MENU
] to select.
3. Press [
/
]
to Radio info, then press [
MENU
] to selct.
4. Press [
/
]
to CP version and press [
MENU
] to selct.
5. Screen shows current Codeplug version.
When enable recording, you can record in communication or remote monitoring. This radio supports
18 hours recording. You can play and delete the recording, etc.
See attachment for details.
With this function enabled, if the angle of redio inclination is bigger than angle, the radio
will alarm. If lift the radio up and the angle bigger than recover angle, the radio stop
alarm. See attachment for details.
ADVANCED OPERATIONS
Phenomena
Solution
The radio cannot be switched on or no
display after being switched on.
A. Battery pack may not be installed properly.
Remove the battery pack and install it again.
B. Battery power may be insufficient. Recharge or
replace the battery pack.
The battery doesn't last for long after being
charged.
The battery life is over. Please replace it with a new
battery pack.
Cannot talk to or hear other members in
your group.
Voices from
non-group members are heard on the
channel.
Analog: Change the CTCSS/DCS
tone and then change all radios' tones in your group.
1. Make sure the frequency and CTCSS are the
same as those of other members.
2.
Make sure you are in the efficiency range, cannot
too far away from other members.
3. Make sure you are set in correct digital mode, and
frequency.
4. In digital mode, make sure set correct code and
encrypt group in current channel.
5. In digital mode, make sure set correct receiving
contacts and receiving group.
TROUBLESHOOTING
