Excera EM8100 VHF, Руководство пользователя

Страница: 40 / 43

Troubleshooting
Phenomena Analysis
Solution
If the above solutions can not fix your problems,or you may have some other queries,please contact us or your local dealer for more technical support.
The Radio Can not be
powered on.
The battery may be improperly installed
The battery may run out
The radio can not detect the
basestaion signal.
The radio is not the basestation legal
user ,can not be regisitered.
Repeated registration
No voice when transmiting
and responding call.
The responding party is inactive
repeatly during calling.
During receiving signals,
the voice is weak discontinuous
or totally inactive.
You can not communicate with
other members
Irrelevant communiction or
noise is heard on the channel
During receiving signal is discontinuous.
The radio ID may be repeated
Signalis discontinuous,get access to
transmitting again after signal is totally inactive.
The battery strength may be too low.
The volume may be set to a low level.
The antenna may be get loose or may be
improperly installed.
The speaker may be blocked or damaged
The poor quality of communication signals
You may be at an unfavorable position.For
example,your communication may be blocked
by high buildings or frustrated in the underground areas.
Remove the battey and attach it again.
Recharge or replace the battery
Clean the battery contacts
,
If the problem can not be solved,contact your dealer
or authorized service center for inspection and repair.
Make sure the radio in base station effective signal range.
Contact the person who are in charge of this base station,make sure the
radio are the legal user of base station NMS
Contact the person who are in charge of this base station,
make sure no the radio ID are repeated of base station NMS.
Recharge or replace the battery.
Move to an open and flat area,and restart the radio.
Increase the volume by Volume Control Knob.
Power off the radio ,and re-install the antenna.
Clean surface of the speaker.If the problem can not be solved,contact your
dealer or authorized service center for inspection and repair.
Make sure all member in the effective communication range.
Stay away from equipment that may cause interference.
You may suffer from external disturbance
(such as electromagnetic interference).
The battery may suffer from poor contact
caused by dirtied or damaged battery contacts
The Radio can not be
regisitered.
Make sure the radio in base station effective signal range.
Make sure the radio in base station effective signal range. During receiving signal is weak.
The Radio Can not transmit
and respond call.
Make sure the radio in base staion effective signal range.
The poor quality of communication signals
The poor quality of communication signals
The noise is too lound.
Make sure all member in the effective communication range.
Make sure all member in the effective communication range.
39