X3M
User Manual
www.excelvalley.com
13
Uploading Presets
Presets are profiles that let you change the sound signature of the device.
A Preset editor is supplied and will be covered in the next chapter.
A set of default Presets are available from the X3M product page for
download:
• Factory default Preset
• Dry Preset (No Reverb and Chorus effects)
• Boombastic (Factory default Preset with bass boost applied)
• Serdaco Preset (A balanced Preset with slight Reverb and Chorus
effects)
Preset upload process
Plug in the X3M in a USB port and the USB MIDI driver X3M will become
available.
Start X3MUPLOAD and in the “Select interface” section
select the right
MIDI device
: X3M for OUT and IN. Look under “Target Device” and
confirm the model and firmware version.
In the “Action” section, click on the button with the three dots and
select a Preset in the DXP-format
. The Destination address should
update automatically to 0x70000 (this is the default address for the
Preset).
Press the “Update” button
and the flashing procedure commences.
Uploading a Preset happens very fast, within a second.
After the Preset is uploaded,
press the “Reboot” button
. You might hear
a confirmation sound from the operating system.
The X3M is now ready for use!