4
c) Select the sections where you want the transposer action to
be effective, switching on any of the section buttons (TRBL1,
TRBL2, etc.).
The transposer settings can be stored into the User Memories.
PROGRAM CHANGE FILTER
The Program Change Filter is used to deactivate the
"Program Change" and "Bank Select" Midi message
transmission on any particular section, when a User Memory is
recalled.
Thus it is possible to create and store combinations which
select sounds only at the right hand, for instance, leaving the
bass and chord sounds unaltered.
Also, it is possible to re-organize our own combinations
(User Memories), having some of those to change the left hand
sounds only, others the right hand sounds.
How To Set The Program Change Filter
a) Press several time the FUNCT button until the display
reads "PCFL".
b) Select the sections where the filter must be
effective, switching on any of the section buttons.
KEY VELOCITY
The Midi "Key Velocity" parameter which is sent along with
the pitch code any time a key is pressed, can be programmed
separately for each section to give the sound more effectiveness.
How To Set The "Key Velocity" Value
a) Press the FUNCT button several times until the display
reads "vLnn", where "nn" stands for the currect key velocity
value
b) Select the section where the key velocity value has to be set.
c) Press the UP or DWN buttons to set the desired value.
PLEASE NOTE:
