Excelsior INC-13 Series, Руководство оператора

Страница: 11 / 17

• • •
Programming
Press
PROG. key to select the program from P1 to
P9. The incubator will begin to heat automatically
according to previous set temperature or default
temperature of 56.0°C, as displayed.
When the incubator reaches the set temperature, the
display will read “OK”. See section “Setting
Temperature” to adjust temperature set point.
Press
PROG. key again to display incubation time.
After 3 seconds, the display will return to temperature.
Press
START/STOP key to start timing. The “:” will
flash, when the time is 00:00, “
√√
” will be displayed
and the buzzer will alarm. If P1 was selected, one
alarm will sound. For P2, two alarms will sound and
so on.
Press
START/STOP key for 2 seconds to stop
countdown.
All programs (P1, P2, P3,...P9) are separate and can
be used simultaneously.
8