Excell Excell XR2625 Скачать руководство пользователя страница 7

7 - ENG

A14687

  

 

RISK OF CHEMICAL BURN

WHAT CAN HAPPEN

HOW TO PREVENT IT

  •  Use of acids, toxic or cor ro sive 

chemicals, poisons, in sec ti cides, or 
any kind of flam ma ble solvent with 
this product could re sult in se ri ous 
injury or death.

  •  Do not use ac ids, gasoline, ker-

o sene, or any other flammable 
materials in this product. Use only 
household de ter gents, cleaners and 
degreasers recommended for use in 
pres sure washers.

 • Wear pro 

tec tive clothing to protect 

eyes and skin from con tact with 
sprayed materials.

  

 

RISK OF ELEC TRI CAL SHOCK

WHAT CAN HAPPEN

HOW TO PREVENT IT

 • Spray di 

rect ed at elec tri cal outlets or 

switch es, or ob jects con nect ed to 
an elec tri cal circuit, could re sult in a 
fatal electrical shock.

  •  Unplug any elec tri cal ly op er at ed 

product before attempting to clean 
it. Direct spray away from electric 
out lets and switches.

 

RISK OF INJURY FROM LIFTING

WHAT CAN HAPPEN

HOW TO PREVENT IT

  •  Serious injury can result from 

attempting to lift too heavy an 
object.

  •  The pressure washer is too heavy 

to be lifted by one person. Obtain 
assistance from others before lifting.

READ AND SAVE THESE INSTRUCTIONS

SPECIFICATIONS

Model  

 

XR2625

PSI Max* 

 

2600

Operating PSI 

 

2340

GPM Max* 

 

2.5

Operating GPM   

2.25

* Water flow and maximum pressure ratings determined in accordance with PWMA 
standard PW101.

Содержание Excell XR2625





















Отзывы: