Excell ESW-E, Руководство пользователя

Страница: 8 / 18

6
EXCELL PRECISION CO., LTD.
ZSME300000276
02005324
UNITS: switching units
Press the UNITS key to switch weight units, the icons or arrows will indicate the
active units as appropriate. The units available are dependent on the exact scale
model.
After power off, the scale will memorize the active units. When the scale is powered
on again, it displays the previously active units.
TARE: tare key
The tare function will not operate during the following conditions:
When the scale powers on, the weight is still below zero after a container is placed
on the weigh pan. Or the tare value is over the full scale capacity.
Tare function
(1) Put a container on the weigh pan and after the weight is stable, press the TARE key
to zero the weight of the container. The screen displays the “ Æ
0
Å ” “STABLE” icon.
(2) Put the goods in the container, the screen displays the net weight value of the goods.
(3) Remove the full container; the screen displays the negative weight value of the
container. At this time pressing the TARE key again will cancel the tare and the
scale reverts back to zero. The screen displays the “
Æ
0
Å
” “STABLE” icon.
The tare function can be operated continually to the full weighing capacity of the scale.
Continual tare operation is adding or removing tare objects on weigh pan and
pressing the TARE key each time.
NET | GROSS: switch NET or GROSS key
NET/GROSS key is only used in Tare mode.
In the Tare mode, the screen displays the “Net” icon,
In tare mode, when the GROSS icon is on, the weight value on the display is the total
amount of the tare value. When the GROSS icon is off, the weight value on the display
is the net value. press the
NET/GROSS key to switch between the “Net value” and the
“Gross value”.
At the Gross status, only OFF and NET/GROSS keys are functional.
1-5 Self-Test Mode
Set the switch SWA1 on the bottom of machine to the LOCK position.When the scale
count down, press NET/GROSS and ON/ZERO key together, Wait till display shows
to enter “Self-Test Mode”.
Press
UNITS
key
Press
ON/ZERO
key
Press
ON/ZERO
key
Press
ON/ZERO
key
Press
ON/ZERO
key
Press
UNITS
key
Press
UNITS
key
Press
UNITS
key