Excel Sportrek, Руководство пользователя

Страница: 21 / 25

6. Maintenance
6.1. Regular maintenance
The Excel Sportrek scooter requires very little maintenance. All bearings of the scooter are sealed and
permanently lubricated, additional lubrication is not required. However, there are some things that
can help you optimise the appearance and performance of your scooter.
6.2. Cleaning your scooter
Tyres

Clean the tyres with normal cleaning products and a damp cloth. Do not use solvents as they
may damage the material of the tyre.
Body
 Clean the body of your scooter with a damp cloth;

Use cold water and mild soap to remove dirt and oil;
 Wash the scooter by hand and a soft cloth.
Vinyl Seat
 Use a mild soap or detergent and clean the seat with a damp cloth. A vinyl leather cleaner may
also be used.
6.3. Batteries and charging
Your scooter is equipped with four, sealed lead acid batteries. These batteries do not require any
maintenance. Before you use your scooter, you must fully charge the batteries. We encourage you to do so
for at least 12 hours.
Charging procedure
Recharge your batteries as following to extend the life:

Turn the power of your scooter off;
 Slide away the cover of the battery socket at the driving position of the tiller and insert
the battery charger in the socket;

Put the charger into the outlet;
 Do not switch on the battery charger until all the plugs are in position;
 The led light of the battery charger will be amber while charging;

The led light will turn green when the batteries are fully charged;

If you are not going to use the scooter for more than a week, fully charge the batteries
and then disconnect them from the scooter.
 When not using the scooter, the battery must be stored in a frost-free area, no less
than 6 degrees.
1 9
© 2016 VAN OS MEDICAL UK Ltd Excel House, Lincoln Way, Sherburn In Elmet
T: +44 (0)1977 681400 Fax. +44(0)1977 683397 E: sales@vanosmedical.com W;www.vanosmedical.nl/en
7. Failure / clear errors
Your Excel Sportrek scooter is QC inspected and ready for use. The following fault diagnosis
system indicates through a fault code what the problem is.
Number shown on LCD screen Meaning
1
Battery needs recharging
2 Battery voltage is too low
3 Battery voltage is too high
4 Current limit time out /Controller over heat
5 Brake fault
6 Not in neutral at power up
7 Speed pot error
8 Motor volts error
9 Other internal error
10 Push too fast fault
In case of an error it is important that you consult your dealer. Except for numbers 1 and 2.Then you
need to recharge the batteries. For all other errors, you need to contact your dealer.
Warning:
Never repair your scooter yourself. When you do this, the warranty expires.
© 2016 VAN OS MEDICAL UK Ltd Excel House, Lincoln Way, Sherburn In Elmet
T: +44 (0)1977 681400 Fax. +44(0)1977 683397 E: sales@vanosmedical.com W;www.vanosmedical.nl/en
20