Excel Airide B-Ace, Руководство пользователя

Страница: 24 / 45

23
5.3. Push the electric wheelchair
You can use the electric wheelchair if needed also push. For this, the engines have to be disconnected by
the two freewheeling switches. You must turn the freewheel switches in the push position
The freewheeling switches have two positions:

Operating position as the freewheeling switches in the center position (picture 1);

Push mode (picture 2). Caution! There are two ways to switch, 1st position when lever is pulled
forward, 2nd position when lever is pushed backwards the engines in push mode is. However,
there is no difference between the two positions.

Warning:
• You must act above both the left and right engine to execute before continuing. The
• The facilitator should control the freewheeling switches;
• Never move the neutral switches in the push on a slope! When the freewheeling switches fact is, the
electromagnetic brakes off, put in the push this electric wheelchair down a slope can drive;
• The electromagnetic brakes only work in the driving position;
• Set the freewheeling switches directly to the drive position when it is not pushed.
5.4. Use of the armrests
Remove the armrests

Grasp the lever knob (picture 3);

Release the lever by turning it (picture 4) counterclockwise;

When you come to the session, you must pull (picture 5) the lever back and move the lever down,
repeat until you can take the arm off;

When the armrest is loose, grab it (picture 6, next page);

Pull the armrest straight up (picture 7, next page).
Picture 4
Picture 3
Picture 5
Picture 1 Picture 2