Excalibur RS-255-EDP+, Руководство по эксплуатации

Страница: 6 / 12

6
Step 1 Have all transmitters which are to operate the system at hand. Then,
turn the ignition “on”.
Step 3 Press the button on each remaining transmitter one at a time. The sys -
tem will turn the lights off then back on to confirm that each was learned. If a code
is not received within a 10 second period, the learning process will automatically
terminate, as indicated by the lights turning off.
Step 4 Turn the vehicle’s ignition key “off”.
Step 2 Within 5 seconds of turning on the ignition, press the Valet Switch 5
times. The status light and parking lights will illuminate, confirming that for the next
10 seconds the system is ready to learn a transmitter/controller code. To enter
a code, simply press and release the transmitter button. When the first code is
learned all existing stored codes will be erased.
Standard Programming: Before starting, be sure the system is in an “unlocked”
state by using a working transmitter or performing a manual override.
Step 1 Turn the ignition key “ON”, then “OFF”
Step 2 Within 5 seconds of step 1, press the valet switch 5 times to access user
features (10 times to access installer features).
~ The parking lights and the status light will turn on.
Step 3
Within 10 seconds of step 2, press the valet switch the number of times cor -
responding with the desired feature’s number.
~ The status light and the parking lights will flash equal to the selected feature.
Step 4 Change the feature by pressing the brake pedal the same number of times
that corresponds with the desired setting.
~ The status lights and the parking lights will flash equaling the selected setting.
Step 5 If you wish to change more features, repeat steps 3 & 4 at this time.
Step 6 To exit programming, turn the ignition key “ON” then “OFF”. Or,
you can wait 10 seconds for programming mode to expire.
Code Jumping
TM
Technology
Code jumping technology uses a complex algorithm to change the transmitter’s
codes every time a button is pressed to prevent a thief from copying the signal. Only
the system in your car has the key to decipher this code and it is not replicable.
Automatic Transmitter Verification
TM
There the potential threat of someone, who has temporary access to your vehicle
(mechanic, valet), programming their own transmitter to your system. For example,
someone could do so and gather your personal info from any paper work in your ve -
hicle. Then, they could visit your home and help themselves to the contents of your
vehicle without any signs of intrusion. ATV
TM
shows you how many transmitters are
programmed to your system by flashing the status light every time you turn on the
ignition key for a 10 second period. Easily identify if transmitters have been added to
your system.
Transmitter Protection & Technology
Programming Transmitters
Programming Features