11
OPTIC EXCALIBUR
English
•
Make sure the product recycles from the return tube (
G4
).
•
Close the recirculating-safety valve (
G5
)
(turn clockwise till
the valve has released)
.
NEVER point the spray gun at yourselves or at
other people.
The contact with the casting can cause serious
injuries.
In case of injuries caused by the gun casting, seek
immediate medical advice specifying the type of
the product injected.
Recirculating-safety valve: when working at the
maximum pressure available, releasing the gun
trigger sudden increases of pressure can occur.
In this case, the recirculating-safety valve opens
automatically eliminating part of the product from
the recirculating tube.
Then it closes so as to go back to the fi rst working
conditions.
H
CLEANING AT THE END
OF THE WORK
•
Reduce pressure to the minimum
(turn counterclockwise the
pressure control knob (
H1
) )
.
•
Press the switch (
H2
) placed on the box of the electric motor,
to stop the equipment.
•
Press the switch
“ON”
(I)
of the equipment and turn a little
the pressure control knob clockwise (
G3
), so as the machine
works at the idle speed.
SPRAY ADJUSTMENT
•
Slowly turn clockwise the pressure control knob to reach the
pressure value in order to ensure a good atomization of the
product.
•
An irregular and marked spray on the sides indicates a low
working pressure. On the contrary, a too high pressure causes
a high fog
(“overspray”)
and waste of product.
•
In order to avoid overthickness of paint, let the gun advance
sideways
(right-left)
when spraying.
•
Always paint with regular parallel bands coats.
•
Keep a safety and constant distance between the gun and the
support to be painted and also keep yourselves perpendicular
to it.
•
Now the machine carries on sucking the product till the fl exible
hose is full, up to the gun.
Then it will stop automatically.
G3
G5
Содержание Larius
Страница 2: ......
