Page | 24
Using the e68 DAC - Mac OS
Using the Asynchronous USB Input - Mac OS
Before turning your amplifiers ON, always check the e68 DAC front panel to make sure
that the volume level is below -25dB.
Please follow the safety measures below strictly. It is quite common to set the volume on
your Mac to maximum. You should never do this when your e68 DAC is connected to a
powerful amplifier. Playing music or sound effects at maximum level is dangerous for your
health and may damage your audio equipment.
Please note that the e68 DAC will match the volume level of your Mac when it is turned
on. This may cause unexpected volume level rising.
•
The e68 DAC can be controlled from the front panel buttons, using an IR remote control or from
the Mac screen.
•
Make sure that your power amplifier is turned off.
•
Make sure that all cables are connected.
•
Turn on the unit using the
Power
button on the front panel or the remote control. The front
panel display will light up. After powering on the last used input is selected by default. Select the
USB Input.
•
Lower the volume to at least -25 db. The volume on the e68 DAC can be controlled from the
Mac screen, from the device front panel, or with the infrared remote control.
