Step 4:
•
Determine the place where the wipers need to be on the outside and drill with use of the
drilling template the holes for mounting the housing.
•
Mount the Mounting legs (2197.310) on the outside wall
•
Place the Neopreen blind rivet (2100.084) locking nut M6 in the housing
•
Mount the housing with the wiper motor between the Mounting legs using the 4 M6 Bolts with a
little lubricating as described and tighten these with the correct torque*.
Note!
The mounting legs can also be placed with the mounting side pointing outwards, be aware that the
drilling template included is not intended for mounting this way.
Arm and blade
For mounting the arm and blade please read the manual of the Exalto 223BD Wiper system.
Bearing
Dogbone
Nut M10
Tightening 33Nm/24ft. lbs
Nut M8
Tightening 17Nm/12ft. lbs
Arc Disc
Spindle Lever
Half Nut M8
Tightening 17Nm/12ft. lbs
Pin
Tightening 16.3Nm/12ft. lbs
Hexagon socket head cap screw
Tightening 8Nm/6ft. lbs
Bearing
Spacer
Glass or Bulkhead
Glass or Bulkhead
Glass
Glass
Tightening 4.5Nm/3.3ft. lbs
Tightening 16.3Nm/12ft. lbs
8
MANUAL WIPER SYSTEMS
