Manual EVO-LINK-200 series
Version 1.2
20.01.2022
Page
6
of
31
INTENDED USE
The EVO-LINK-200 series truss mount is intended for use by fully qualified,
trained and competent persons to provide a safe and secure installation
and adjustment of the products.
Only use the truss mount with the frame in a closed indoor environment
(conference rooms, theatres, convention halls, etc.) where there is no wind,
moisture, excessive heat etc. Serious accidents and death can occur if the
products are installed in the wrong environment.
Make sure that only the compatible projector frames are installed to this
truss mount. Do not try to use it with not recommended frames because
serious accidents and death can occur!
The EVO-LINK-200 series is made for installing on 48-51mm diameter pipe
structures. Do not try to use it with other dimensioned structures as it will
not be safe and people might get hurt or killed.
Always use a rigging sling with steel cable insert and a shackle that is stable
enough for the load including dynamic forces when falling into the rigging
sling! (two sets of rigging sling and shackle are recommended) Otherwise it
is not allowed to use the product and serious accidents or death can
happen.
Do not remove or replace any parts of EVO-LINK-200 series on your own.
Contact the manufacturer or service partner in case of damage or loss.
Removing or replacing parts by non-certified companies or people might
result in serious accidents and death.
WARNINGS
Installation work should only be carried out by a qualified technician.
•
If this product is not installed correctly, serious accidents and death may
result.
Do not use the EVO-LINK-200 series truss mount outdoor.
•
This product is made only for indoor usage. If the EVO-LINK-200 series
truss mount is mounted outdoor, there are many influences like wind or