Exabyte 221L, Руководство по эксплуатации продукта

Страница: 45 / 208

A
UGUST
2005 E
XABYTE
221L
AND
221L-FC L
IBRARIES 29
A
CCESSING
C
ONFIGURATION
O
PTIONS
If a menu contains a triangle symbol ( ), you can either press
[ENTER]
to access
another screen or menu, or you can change values using the operator keys. A
square symbol (
J
) indicates that the screen contains viewable information
only.
Figure 3-2 shows the organization of the operator panel menus.
Table 3-2 provides an overview of the menu options.
Figure 3-2 Library menu structure
Config Menu
Main Menu
Status Screen
Cartridge
Inventory
Security
Robot Mode
SCSI Menu
(221L)
– SCSI IDs
– Emulation Mode
– SCSI Parity
– Option
– Baud Rate Menu
– Clean Slot (
xx )
– Option
– Autoclean Option
– Cleaning Tape
Cycles Left
– POST Barcode
Scan Option
– Verify Barcode
Checksums
– Max Addressable
– Slot
– Override Drive WWN
Ethernet Menu
Demo Menu
– Ethernet
– Configuration
– Network Address
– IP Address
– SNMP Recipient
– Subnet Mask
– Gateway Addr
– Ethernet Security
– Read
– Write
– Bcast
– FTP Username
– FTP Password
Library
Information
– Code Version
– Library Serial
– Num
– System Statistics
– System Sensors
– Def Inq Vend ID
– Def Inq Prod ID
Drive Menu
Command
Menu
– Move Cartridge
– Initialize Element
– Status
– Home Robot
– Park
– Position to Element
– Self Test
– Cycle Entry/Exit Lock
– Cycle Pick/Put
– Cycle Reach
– Cycle X-Axis
– Cycle Wrist
– Cycle Solenoid
Park and Unlock
for Shipping
Lock/Unlock
Entry/Exit Port
– SCSI
– Sequent1
– Sequent2
– Remote
– LCD
– Console
– Drive n Menu
– Drive n Status
– Unload Drive n
– Clean Drive n
Sequential Mode
– Loop
– Restart
– Next Cartridge
Fibre Menu
(221L-FC)
– Port Address
– Loop IDs
– Hard Loop IDs
– Req. Hard ID Option
– Emulation Mode
– World-Wide Names
– Library Node
– Library Port A
– Library Port B
– Drive
n Node
– Drive n Port A
– Drive n Port B
Table 3-2 Library menu options
Menu Option Description
Security Indicates whether options can be changed from the operator panel and allows you
to enable or disable security with a password.
Cartridge Inventory Displays the current inventory information for each library element.
Config Menu Displays the current baud rate setting for the serial port and allows you to change
the baud rate, reserve the last cartridge slot for use with a cleaning cartridge,
enable Autoclean, choose whether the library scans the cartridge bar code labels
during POST, choose whether bar code label checksums are verified, set the
maximum number of cartridge slots the library uses, and override the world-wide
names (WWNs) for the tape drives.
Robot Mode Displays the current robot control mode (SCSI, Sequent1, Sequent2, Remote,
LCD, or Console) and allows you to change the mode.