Exabyte 221L, Руководство по эксплуатации продукта

Страница: 36 / 208

20
P
RODUCT
M
ANUAL
1014258
C
HAPTER
2—I
NSTALLING THE
L
IBRARY
5.
5. 5.
5. For the device at the physical end of each bus, install a terminator on one of
the SCSI connectors for that device.
6.
6. 6.
6. Power on all of the peripheral devices on the SCSI bus(es).
7.
7. 7.
7. Power on the library as described on page 24 .
C
ONNECTING THE
L
IBRARY TO
F
IBRE
C
HANNEL
(221L-FC)
This section provides instructions for connecting the 221L-FC library and its
tape drive(s) to a Fibre Channel network.
Figure 2-11 shows the back panel of the 221L-FC. The library has one
integrated dual single-channel LC optical fiber connector, Port A, which is
used to connect the library to a single loop on a Fibre Channel network. Each
tape drive also includes one integrated dual LC optical fiber connector, Port A,
for connecting the tape drive to a Fibre Channel network. The library can be
on the same loop as the tape drive(s) or on a separate loop.
Figure 2-10 Cabling for a shared SCSI bus
Tape drive
SCSI connectors
Library
SCSI connectors
Terminator
Jumper cables
SCSI cable
(to host)
Figure 2-11 Fibre Channel connectors on the back of the 221L-FC
Tape drive
optical fiber
connector
Library optical
fiber connector