Exabyte 221L, Руководство по эксплуатации продукта

Страница: 162 / 208

146
P
RODUCT
M
ANUAL
1014258
C
HAPTER
7—M
AINTENANCE
5.
5. 5.
5. Check the ASCII setup from HyperTerminal:
a.
a. a.
a. From the File menu, select Properties.
b.
b. b.
b. In the Properties screen, select the Settings tab.
c.
c. c.
c. In the Emulation mode field, select “ANSI.”
d.
d. d.
d. Click on the ASCII Setup button.
e.
e. e.
e. In the ASCII Setup screen, make sure none of the boxes have check marks.
Uncheck the boxes, if necessary.
f.f.f.f. Click OK in the ASCII Setup screen.
g. g. g. g. Click OK again in the Properties screen.
6. 6. 6. 6. The Console program should now appear in HyperTerminal’s main
window. If necessary, type
redraw
and press Enter to refresh the screen.
7.
7. 7.
7. If desired, type
help
and then press Enter to display Console’s Help screen,
as shown in Figure 7-6 .
Note: If garbled characters or no characters appear on the screen, make sure you
have the same baud rate set for the host as you do for the library.
Figure 7-6 Console Help screen