background image

3- ENG

A00088

• Materials placed against or near the pres-

sure washer can interfere with its proper
ventilation features causing overheating
and possible ignition of the materials.

• Never operate pressure washer in an area

containing dry brush or weeds.

• Muffler exhaust heat can damage painted

surfaces, melt any material sensitive to
heat (such as siding, plastic, rubber, or
vinyl), and damage live plants.

• Always keep pressure washer a minimum of

four feet away from surfaces (such as houses,
automobiles, or live plants) that could be dam-
aged from muffler exhaust heat.

• Improperly stored fuel could lead to acci-

dental ignition. Fuel improperly secured
could get into the hands of children or
other unqualified persons.

• Store fuel in an OSHA approved container, in

a secure location away from work area.

• Use of acids, toxic or corrosive chemicals,

poisons, insecticides, or any kind of flam-
mable solvent with this product could re-
sult in serious injury or death.

• Do not spray flammable liquids.

• Breathing exhaust fumes will cause serious

injury or death!

• Operate pressure washer in a well ventilated

area. Avoid enclosed areas such as garages,
basements, etc.

• Never operate unit in a location occupied by

humans or animals.

• Some cleaning fluids contain substances

which could cause injury to skin, eyes, or
lungs.

• Use only cleaning fluids specifically recom-

mended for high pressure washers. Follow
manufacturers recommendations. Do not
use chlorine bleach or any other corrosive
compound. 

RISK TO BREATHING

HAZARD

WHAT CAN HAPPEN

HOW TO PREVENT IT

RISK OF EXPLOSION OR FIRE (continued)

HAZARD

WHAT CAN HAPPEN

HOW TO PREVENT IT

• Your washer operates at fluid pressures

and velocities high enough to penetrate
human and animal flesh, which could
result in amputation or other serious injury.
Leaks caused by loose fittings or worn or
damaged hoses can result in injection
injuries. DO NOT TREAT FLUID
INJECTION AS A SIMPLE CUT! See a
physician immediately!

• Never place hands in front of nozzle.
• Direct spray away from self and others.
• Make sure hose and fittings are tightened

and in good condition. Never hold onto the
hose or fittings during operation.

• Do not allow hose to contact muffler.
• Never attach or remove wand or hose

fittings while system is pressurized.

RISK TO FLUID 
INJECTION

HAZARD

WHAT CAN HAPPEN

HOW TO PREVENT IT

• Injuries can result if system pressure is not

reduced before attempting maintenance or
disassembly.

• To relieve system pressure, shut off  engine,

turn off water supply, and pull gun trigger
until water stops flowing.

• Use only hoses and accessories rated for

pressure higher than your pressure
washer's PSI.

Содержание XR2750

















Отзывы: