NL
FR
EN
NL
www.ewt-france.com
www.ewt-france.com
13
back of the stand when the appliance is placed upright on a
flat floor.
INSTRUCTION FOR USE
1. Please read these instructions carefully before using the
appliance and keep them in case of future use.
2. Make sure that the voltage of your local electricity network
corresponds to the one which appears on the appliance.
3. Before using it for the first time, remove the appliance’s
protective tabs and stickers.
Place your appliance on a flat floor and plug the appliance
into the electrical supply (220-240V, 50Hz) using the electrical
cable.
You can control your appliance by using the touchscreen
control panel (1) located at the top of the stand or by using
the remote control.
The LED display screen can be temporarily switched off by
pressing the LED screen On/Off button (F) on the remote
control or by pressing the ventilation speed control button (E)
for more than 3 seconds on the control panel.
A. Appliance On/Off
B.Ventilation mode control
C.Oscillation On/Off
D.Timer
E.Ventilation speed control
F. LED screen On/Off
G. Ionic function On/Off
Appliance On/Off (A)
Switch the appliance on by pressing the button and switch it
off by pressing the button a second time.
M Ventilation mode control (B)
Normal Mode: The indicator
will light up when Normal
Mode is switched on.
When the appliance is switched on, the ventilation mode will
be set to Normal mode by default. The ventilation speed will
be regular according to the speed selected.
Natural Mode: The indicator
will light up when Natural
Mode is switched on.
When this mode is switched on, the appliance will alternate
between the different ventilation speeds - Fast, Medium, Low
- for periods of 15 seconds for each speed.
Night Mode: The indicator
will light up when Night
Mode is switched on.
When this mode is selected and the appliance is set to Fast
speed, the appliance will remain at this speed then switch to
Medium speed before finishing on Low speed. Each of these
stages will last for 30 minutes. The appliance will therefore
stop functioning after 1 hour and 30 mins when set to Night
mode on Fast speed, 1 hour when set to Medium speed and
30 minutes when set to Low speed.
When this mode is activated, you can deactivate oscillation
by pressing the button (C) while leaving Child mode on.
Child Mode: The indicator
will light up when Child
Mode is switched on.
The timer will be automatically programmed to stop after
3 hours and will automatically activate oscillation of the
appliance. The appliance will activate a ventilation speed
cycle by setting to Fast speed, Medium speed then Low
speed, each for a period of 15 minutes.
Oscillation On/Off (C)
Press the button once to begin oscillation then press it a
second time to stop oscillation of the appliance.
The ventilation direction of the appliance can be adjusted
manually. To incline the appliance, simply push the top of the
appliance backwards. The angle of incline is adjustible up to
around 7°. To put the appliance back into a verticle position,
simply push the top of the appliance forwards.
Timer (D)
The appliance is equipped with a timer, allowing you to
programme the length of time ventilation will last for between
1 and 12 hours. When you press the button once, the timer
will be set to stop the appliance after 1 hour.
Every time you press the button, 1 hour will be added.
In order to deactivate the timer, keep pressing the button until
the time reaches 12 hours then press it one more time and the
timer function will be switched off. You can check that it has
been switched off by ensuring that the timer indicator light is
not lit up on the LED screen.
Ventilation speed control (E)
You can adjust the ventilation speed - Low, Medium, High
- of the appliance by pressing this button. By default, the
appliance will be set to Low speed: press the button a second
time to select Medium speed and a third time to select High
speed
.
CLEANING AND MAINTENANCE
• Always unplug the appliance before cleaning it.
• Clean the surface of the appliance using a soft cloth, do not
use any water.
• If the appliance is very dirty, clean the surface using a damp
cloth (add a non-corrosive cleaning product if required.
• Do not use corrosive detergents, corrosive solvents or
chemical products.
• Do not use an abrasive sponge, scouring pad or hard brush to
clean the appliance.
• Do not immerse the main body of the appliance into water.
• Ensure that the motor and the other electrical components do
not come into contact with water.
• If the appliance is not to be used for a long period, pack it away
carefully. Store it in a dry and ventilated area where it will not
be affected by dust.
• In order to avoid an excessive build-up of dust affecting the
blower, clean the appliance on a monthly basis.
THIS APPLIANCE IS SOLELY DESIGNED FOR DOMESTIC USE
AROMA DIFFUSER
Zephyr.indd 13
26/11/18//48 12:26
Thanks to the fragrance diffuser box, you will be able to
obtain healthier and/or fragrant air.
This box comes supplied with two cotton pads.
1. To diffuse an essential oil, place a few drops onto a
cotton pad.
2. Place the cotton pad back in the box and close it. Keep
the other cotton pad for future use.
3. Hang the box on
the back of the product (8), on
the ventilation fan guard to allow the fragrance of
the essential oil to be diffused.
After you have used them several times, you may replace
the cotton pads using standard cotton pads that are widely
available in shops.
No scent or essential oil is supplied with the product.
