FR
EN
40
DEHUMIDIFIER MODE
Ideal for reducing the level of humidity in a room (spring and autumn, damp rooms, rainy spells...).
When set to dehumidifier mode, the appliance will need to be fitted with the drainage pipe (18) to allow water to be evacuated
outside. To set this mode correctly:
•
Press the button until the
symbol appears.
•
Select the fan speed by pressing the
button.
Three speeds are available:
AUTO-ECO automatic speed: the appliance will automatically adjust ventilation speed according to the temperature
selected
OSCILLATION
This function is useful for selecting the angle or oscillation mode of the deflector: air flow upwards or downwards
Position of the deflector in oscillation mode
To set this option correctly:
• Select use mode (air-conditioner, dehumidifier, fan) as described above.
• Then press the button on the remote control to set automatic oscillation by the deflector
NIGHT MODE
This function is useful during the night as it reduces the appliance’s power consumption.
To set this function correctly:
• Select the air-conditioner or dehumidifier mode as described above.
• Press the
.button.
• The appliance will function in the mode previously selected.
• When you select night mode, the brightness of the screen is reduced.
Night mode allows you to maintain a constant temperature in a room without major fluctuations in temperature or humidity.
The fan speed will remain low while the temperature and humidity level of the room will only change gradually to guarantee
the highest possible level of comfort.
In AIR-CONDITIONER mode, the selected temperature will increase by 1°C per hour over a period of 2 hours. This new
temperature level will then be maintained for the following 6 hours. The appliance will then switch itself off.
NIGHT mode can also be cancelled at any time during use by pressing the
or or
buttons.
In FAN mode, the NIGHT function cannot be set.
PROGRAMMING
Setting the timer
This timer can be used to set the appliance to switch on or off at a chosen time. This will allow you save on power consumption
by optimising the periods when it is in use.
Setting the appliance to switch on
• Switch the appliance on.
• Choose the mode you want to use, such as AIR-CONDITIONER mode set to 24°C at maximum fan speed, for example.
• Then switch the appliance off.
• Press the
button. The screen will display 1-24 hours and the
,
and
• Press
activated and only the
symbol will be displayed on the screen (Fig. 8).
• To cancel the programme that has been set, press the button
again or press the
button. The
symbol will
disappear from the screen.
Fig. 7
Setting the appliance to switch off
• When the appliance is operating, press the
button. The screen will display 1-24 hours and the
will
• Press the button several times until the time you want is displayed. Wait for around 5 seconds, then the timer will be
activated and only the
symbol will be displayed on the screen (Fig. 10).
• To cancel the programme, press the
button again or press the
button. The
symbol will disappear from the
screen.
CHANGE UNIT OF TEMPERATURE
When the appliance is in standby mode, press the button for 20 seconds. You can then change the unit of temperature.
Before
After modification,
Manual_Snowair9HE-12HE_2020.indd 40
Manual_Snowair9HE-12HE_2020.indd 40
13/11/20 08:19
13/11/20 08:19
