4
Low Cool Speed:
Turn the control knob to the “COOL” position (smaller fan), to
operate the unit in low cool speed.
High Cool Speed:
Turn the control knob to the “COOL” position (larger fan), to operate
the unit in high cool speed.
Note:
* When the unit operates in cooling mode, the “POWER” light will be switched on.
* When the water tank is full, the “FULL” light will be switched on.
5
INSTALLATION
Unit Setup
1. Lift unit and remove the exhaust hose from the base.
2. Fit hot air exhaust hose to the unit as shown on diagram below
(Fig.1)
3. Install exhaust hose be rotating it clockwise onto the hot air
exhaust attachment (Fig. 2). Ensure it is fully inserted before use.
4. To remove, rotate in an anti-clockwise direction.
Locating the unit.
Install the portable air conditioner in a flat location with
adequate space to ensure the air inlets and outlets will not
be blocked.
Keep a minimum clearance of 50cm from walls and other
objects. Position the unit to allow the exhaust hose to
reach a suitable window, as shown.
Avoid sharp bends or kinks in the exhaust hose.
The optional adjustable window slider is included to
ensure the exhaust hose is held in place (in the window)
and prevents expelled hot air re-entering the room.
The appliance should not be used in damp areas such as
a laundry or bathroom.
Do not place the unit where it will be in direct sunlight as it may overheat and turn off.
