EWT Clima 280TS, Быстрый старт

Страница: 5 / 20

Turbo fan(Clima 281TSF only)
The turbo fan is used to boost the airflow around the room. This circulates
the heat better and results in a reduced heat up time and a more even heat
distribution. The turbo fan is controlled by the neon switch on the front of
the product.
The turbo can be turned on independently of the heat, however the fan will
switch on and off under the control of the thermostat.
Note: in warm weather the fan can be used to circulate cool air. Once the
heat selection switches are in the off position and the thermostat is set to
‘Max’ the fan will continue to function to circulate cool air.
Safety – overheat protection
For your safety, this appliance is fitted with a thermal cut-out. In the event
that the product overheats, the cut-out switches the heater off automatically.
To bring the heater back into operation, remove the cause of the overheating,
then unplug or turn off the electrical supply to the heater for a few minutes.
When the heater has cooled sufficiently, re-connect and switch on the heater.
Important Notes
Although this heater is manufactured to comply with the relevant safety
standards, certain types of carpets could become discoloured by the
temperatures under a portable heater. If you are concerned about this,
we recommend that you contact the carpet manufacturer for guidance.
Alternatively, either stand the heater on a suitable base to shield the carpet
or wall-mount it – call our Helpline for further advice.
You may notice some parts of the element appearing to be hotter from time
to time because of the variable airflow through the heater. This does not
cause a safety hazard.
The heat outlet grille may become discoloured with use – this is caused by
airborne pollution and is not a fault.
Recycling
For electrical products sold within the European Community.
At the end of the electrical products useful life it should not be
disposed of with household waste.
Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling advice
in your country.
Cleaning
WARNING – ALWAYS DISCONNECT FROM THE POWER SUPPLY
BEFORE CLEANING THE HEATER.
Before commencing cleaning, switch off the heater and allow it to cool.
Disconnect the electricity supply to the appliance.
The outside can be cleaned by wiping it over with a soft damp cloth and
then dried. Do not use abrasive cleaning powders or furniture polish, as
this can damage the surface finish.
To release the heater from the wall bracket for cleaning or redecoration,
depress latch on each bracket and hinge forward.
After Sales Service
Should you require after sales service or should you need to purchase any
spares, please contact the retailer from whom the appliance was purchased
or contact the service number relevant to your country on the warranty card.
Please do not return a faulty product to us in the first instance as this may
result in loss or damage and delay in providing you with a satisfactory
service.
Please retain your receipt as proof of purchase.
UK
-2-
Model Identifier(s):
Clima
280TS
Clima
281TSF
Heat output
Nominal heat output Pnom 2.0 2.0
kW
Minimum heat output (indicative) Pmin 1.2 1.2
kW
Maximum continuous heat output Pmax,c 2.0 2.0 kW
Auxiliary electricity Consumption
At nominal heat output elmax 0.0 0.0
kW
At minimum heat output elmin 0.0 0.0 kW
In standby mode elSB 0.0 0.0 kW
Type of heat output/ room temperature control
With mechanical thermostat room
temperature control
Yes Yes
Contact details Barn Road, Dunleer, Co. Louth,
Ireland, A92 WV02