eWON eWON Flexy, Руководство по установке

Страница: 13 / 40

Chapter 2
Safety, Environmental & Regulatory Information
- Caution -
In any other mounting position than the one explained here above, the specified temperature
has to be derated to -25°C to +40°C.
2.6.3. Earthing
Earthing the eWON is necessary to eliminate unwanted transients (lightning protection) and
to conform to the EMC requirements. Therefore, a functional earth (FE) terminal is available
on the main connector as shown in §
#A.1.Main Connector . Connect this terminal directly
to a low impedance ground. Shielded cables have to be used for Ethernet and serial
connectivity to comply with the EMC requirements.
2.6.4. Environmental Limits
The equipment will operate properly within following environmental limits provided it is
mounted according to the above mentioned recommendations:
Characteristic Value
Operating temperature -25° to +70 °C
Storage temperature -40° to +70 °C
Relative humidity 10 to 95% non-condensing
Operating altitude Up to maximum 2000m
Storage altitude Up to maximum 3000m
Mounting Latch for DIN rail EN50022-compliant
2.6.5. Labelling Information
•
The OEM User Manual (for integrators) must provide clear instructions, to the
OEM, explaining the labeling requirements, options and OEM User Manual instructions
that are required.
•
The host OEM User Manuel (eWon's manual) must contain clear instructions on how end-
users can find and/or access the module and the FCC ID
Page 13 / 40 eWON Flexy - Base Units | IG 014