eWON
2101CD™
Installation Guide
ver 1.6
page 26 of 34
8.2 Ethernet
By default, only the LAN Ethernet interface of the eWON2101CD
TM
can be used to access the
internal WebSite.
8.2.1 Ethernet LAN
The eWON can be accessed by a 10/100BaseTX Ethernet connection. This
connection can be made with two different cables (straight or crossed).
These cables have 8 copper conductors and are known as UTP Class 5 with
RJ45 terminations at both ends.
The type of cable (straight or crossed) depends on the equipment the eWON
will be connected to. The most current cases are the direct connection with a
PC (crossed) and the connection through a hub/router (straight).
The WAN port have 2 leds showing the state and activity on the port.
color & activity
Meaning
Upper Led
off
No Link
green fixed
Link
Lower Led
green blink
Activity (RX or TX)
Table 17: Led meanings on Ethernet WAN
LAN
