Intended use
Use and operation solely with the following machines
099-008632-EW501
05.12.2019
7
3
Intended use
WARNING
Hazards due to improper usage!
The machine has been constructed to the state of the art and any regulations and
standards applicable for use in industry and trade. It may only be used for the welding
procedures indicated at the rating plate. Hazards may arise for persons, animals and
material objects if the equipment is not used correctly. No liability is accepted for any
damages arising from improper usage!
• The equipment must only be used in line with its designated purpose and by trained or
expert personnel!
• Do not improperly modify or convert the equipment!
To transport arc welding systems and process-dependent components such as shielding gas cylinders.
3.1
Use and operation solely with the following machines
One of the listed power sources must always be used on the transport cart as the basic module. The cur-
rent sources can be expanded with further modules.
• Phoenix 355, -405, -505
[1] [2] [3]
• Taurus 355, -405, -505
[1] [2] [3]
• Picomig 185, -355
[1]
• Picotig 200 AC/DC
[3] [4]
• Tetrix 230
[3] [4]
[1]
Can be combined with a cooling unit cool50, a toolbox ON Case or a voltage converter voltConver-
ter 230/400
[2]
Can be combined with a wire feeder drive (expandable optionally)
[3]
Can be combined with a wire feeder tigSpeed (expandable optionally)
[4]
Can be combined with a cooling unit cool40, -41
For systems equipped with a wire feeder, additional options have to be retro-fitted. See the
system overview for the relevant options and combinations
> see 5.1 chapter
.
