Safety instructions
Transport and installation
099-001345-EW501
16.11.2012
7
2.4
Transport and installation
WARNING
Improper work carried out!
In the event of improper work carried out on the display stand, the display stand may
lose stability, tip over and result in serious injury!
• Only use the construction and fitting parts supplied!
• Do not load the display stand without reinforcement panels affixed!
CAUTION
Improperly secured equipment!
Equipment, equipment combinations and accessories incorrectly fastened onto
transport systems can tip over during transport and cause injuries!
• Only used the original parts supplied to fasten the equipment.
• Use the systems only for transporting the machines given in the "Intended use" chapter.
• Check the fixing points before each transport and at regular intervals.
Damage due to supply lines not being disconnected!
During transport, supply lines which have not been disconnected (mains supply leads,
control leads, etc.) may cause hazards such as connected equipment tipping over and
injuring persons!
• Disconnect supply lines!
Risk of tipping!
When moving or setting up, the transport vehicle can tip over and injure persons or
become damaged.
• Move or set up the machine on level, firm surfaces.
• Secure add-on parts using suitable equipment.
• Replace damaged transport rollers and their fixing elements.
